🎉 Up to 70% Off Selected ItemsShop Sale
SPL - Performer s900
HomeStore

SPL - Performer s900

SPL - Performer s900

Select Color
From $1,750.00

Original: $5,000.00

-65%
SPL - Performer s900

$5,000.00

$1,750.00

The Story

SPL - Performer s900

Right in the center – with big sound!

The SPL Performer s900 stereo power amplifier marks the middle of the line and is based on the big SPL Performer s1200 stereo power amp in terms of the selection of components and conceptual design.

This is where sonic greatness meets performance specs that perfectly
match high-resolution but not overly power-hungry speakers of any size.
With an amplifier output of 2 x 370 W (4 Ω) [2 x 420 W (2 Ω); 2 x 200 W (8 Ω)],
it truly has enough reserves to powerfully drive any loudspeaker.

The Performer s900 stereo power amplifier is a compact size powerhouse. It excels in exceptional headroom thanks to the SPL VOLTAiR technology and impresses with a detail-rich, vivid, honest and musically outstanding sound.

Conventional solid-state power amplifiers tend to operate in a critical range of the built-in components – this results in unpleasant harmonical artifacts. Tube power amplifiers also distort at their limit but their characteristical behaviour softens this roughness and harshness. Non the less this is a falsified representation of the sound image. 

Thanks to VOLTAiR Technology, the Performer s900 can process much higher levels without even coming near to a critical range. All components constantly operate in the optimal range. The result is a very pleasant, natural and relaxed sound experience. Enjoy your music in every detail and without any listening fatigue.

Specifications

Analog Inputs: XLR (balanced), RCA (unbalanced)

Input impedance
20
Input trimming
0 dB to -5.5 dB in 0.5 dB steps
Input sensitivity
8 dBu

Loudspeaker Outputs: Binding posts with 4 mm ø cable hole (screwable) and banana plug

Output power (RMS, 2 Ω)
2 x 420 W
Harmonic distortion (1 kHz, 2 Ω)
< 0.07 %
Output power (RMS, 4 Ω)
2 x 370 W
Harmonic distortion (1 kHz, 4 Ω)
< 0.06 %
Output power (RMS, 8 Ω)
2 x 200 W
Harmonic distortion (1 kHz, 8 Ω)
< 0.04 %
Output voltage (Peak-to-Peak)
112 V
Output voltage (RMS)
40.2 V
Output impedance (20 Hz – 20 kHz)
< 0.035 Ω
Frequency range (-3dB)
10 Hz – 80 kHz
Amplification gain
26 dB
Damping factor (1 kHz, 8 Ω)
> 280
Noise (A-weighted)
-123 dB
SPL - Performer s900 - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

SPL - Performer s900 - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

SPL - Performer s900

Right in the center – with big sound!

The SPL Performer s900 stereo power amplifier marks the middle of the line and is based on the big SPL Performer s1200 stereo power amp in terms of the selection of components and conceptual design.

This is where sonic greatness meets performance specs that perfectly
match high-resolution but not overly power-hungry speakers of any size.
With an amplifier output of 2 x 370 W (4 Ω) [2 x 420 W (2 Ω); 2 x 200 W (8 Ω)],
it truly has enough reserves to powerfully drive any loudspeaker.

The Performer s900 stereo power amplifier is a compact size powerhouse. It excels in exceptional headroom thanks to the SPL VOLTAiR technology and impresses with a detail-rich, vivid, honest and musically outstanding sound.

Conventional solid-state power amplifiers tend to operate in a critical range of the built-in components – this results in unpleasant harmonical artifacts. Tube power amplifiers also distort at their limit but their characteristical behaviour softens this roughness and harshness. Non the less this is a falsified representation of the sound image. 

Thanks to VOLTAiR Technology, the Performer s900 can process much higher levels without even coming near to a critical range. All components constantly operate in the optimal range. The result is a very pleasant, natural and relaxed sound experience. Enjoy your music in every detail and without any listening fatigue.

Specifications

Analog Inputs: XLR (balanced), RCA (unbalanced)

Input impedance
20
Input trimming
0 dB to -5.5 dB in 0.5 dB steps
Input sensitivity
8 dBu

Loudspeaker Outputs: Binding posts with 4 mm ø cable hole (screwable) and banana plug

Output power (RMS, 2 Ω)
2 x 420 W
Harmonic distortion (1 kHz, 2 Ω)
< 0.07 %
Output power (RMS, 4 Ω)
2 x 370 W
Harmonic distortion (1 kHz, 4 Ω)
< 0.06 %
Output power (RMS, 8 Ω)
2 x 200 W
Harmonic distortion (1 kHz, 8 Ω)
< 0.04 %
Output voltage (Peak-to-Peak)
112 V
Output voltage (RMS)
40.2 V
Output impedance (20 Hz – 20 kHz)
< 0.035 Ω
Frequency range (-3dB)
10 Hz – 80 kHz
Amplification gain
26 dB
Damping factor (1 kHz, 8 Ω)
> 280
Noise (A-weighted)
-123 dB